Engineering, 12.11.2019 22:31 sneckoencko
3. a well 12-in in diameter penetrates vertically through a 60 foot thick confined aquifer. after a long period of pumping at a rate of 350 gpm, the drawdowns in the wells 57 ft and 148 ft from the pumped well were found to be 12 ft and 7.4 ft respectively. what is the transmissivity of the aquifer? what is the approximate drawdown in the pumped well? assume that the initial piezometer level is 108 feet above the datum.
Answers: 2
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
Engineering, 04.07.2019 19:20
Heat transfer by is the fastest mode of heat transfer that requires no intervening medium. a)-conduction b)-convection c)-radiation d)-conduction and convection
Answers: 1
3. a well 12-in in diameter penetrates vertically through a 60 foot thick confined aquifer. after a...
Computers and Technology, 27.11.2019 06:31