Engineering, 11.11.2019 22:31 gamboaserg

2.12. challenging content

the international temperature scale of 1990 (its-90) established fit curves for taking voltage data to temperature for various standard thermocouple types. these fit curves yield values of temperature from voltage that are within ±0.04 °c for k-type thermocouples. as a result, a device programmed with these fit curves and an extremely accurate cold-junction temperature compensation could result in thermocouple measurements for temperature that are within ±0.04 °c. use these fit curves for plotting the temperature versus voltage for a k-type thermocouple over a temperature range of 0 to 1000 °c.
determine a linear fit curve (slope and intercept) for determining temperatures from voltage over this temperature range.

compare the values from the linear fit to the fit curves by obtaining a scatter plot in excel. plot the difference between the temperatures obtained from your linear fit and the its-90 curve fit on the y-axis. on the x-axis plot the temperature from 0 to 1200 °c. your results should be submitted separately in an excel file.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 08:10

Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

Answer

Engineering, 04.07.2019 18:10

A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.

Answers: 2

Answer

You know the right answer?

2.12. challenging content

the international temperature scale of 1990 (its-90) establish...

Questions