subject
Engineering, 10.11.2019 01:31 josephmarvens1666

Acoal-burning steam power plant produces a net power of 300 mw with an overall thermal efficiency of 33 percent. the actual gravimetric air–fuel ratio in the furnace is calculated to be 12 kg air/kg fuel. the heating value of the coal is 28,000 kj/kg. determine the amount of coal consumed during a 24-hour period. (you must provide an answer before moving to the next part.) the amount of coal consumed is kg/s.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
question
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
question
Engineering, 04.07.2019 18:10
Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.
Answers: 2
question
Engineering, 04.07.2019 19:10
An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed
Answers: 3
You know the right answer?
Acoal-burning steam power plant produces a net power of 300 mw with an overall thermal efficiency of...
Questions
Questions on the website: 13722367