Conclusion write a conclusion statement that addresses the following questions: • do your data support or fail to support your hypothesis (include examples)? • describe the pattern observed in volume measurements as different masses or volumes of the unknown solid or liquid were selected. explain why this pattern exists. • how do you think the investigation can be explored further? post-lab reflection questions answer the reflection questions using what you have learned from the lesson and your experimental data. it will be to refer to your chemistry journal notes. answer questions in complete sentences.

A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?