subject
Engineering, 08.11.2019 23:31 iamthepantaloon8357

In a power generation plant, coal undergoes combustion to form co2, co, and so2. the mole fraction of sulfur in the coal is 1.1% and the rest can be assumed to be carbon. the selectivity of co2to co is 8.30. all the coal reacts (no carbon or sulfur in the exit stream). to prevent the formation of acid rain, the flue gas is passed through a scrubber to remove so2. (the removal of co, n2, o2, and co2from the scrubber can be assumed to be negligible.) 955 kg/min of water is supplied to the scrubber, the partial pressure of so2in the scrubber is 21 millibar, the exiting concentration can be assumed to be in equilibrium with the flue gas, and henry’s law constant for so2in water is 0.83 kg*bar/mol.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79
Answers: 1
question
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
question
Engineering, 04.07.2019 18:10
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
You know the right answer?
In a power generation plant, coal undergoes combustion to form co2, co, and so2. the mole fraction o...
Questions
question
Mathematics, 11.10.2019 20:30
question
Mathematics, 11.10.2019 20:30
question
English, 11.10.2019 20:30
Questions on the website: 13722363