subject
Engineering, 08.11.2019 23:31 Truezoe09

Consider laminar flow of a fluid with 3u 4 that undergoes a combined entrance process within a constant surface temperature tube of length / [fdw with a flow rate of . an engineer suggests that the total heat transfer rate can be improved if the tube is divided into 1 shorter tubes, each of length /1 //1 with a flow rate of . determine an expression for the ratio of the heat transfer coefficient averaged over the 1 tubes, each experiencing a combined entrance process, to the heat transfer coefficient averaged over the single tube, .

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
question
Engineering, 04.07.2019 18:20
Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false
Answers: 2
question
Engineering, 04.07.2019 19:10
Apressure vessel with an r/t 20 cannot be treated as thin walled vessel. a)-trune b)- false
Answers: 3
question
Engineering, 04.07.2019 19:20
Apiping systems consists of 6 m of 6-std type k and 12 m of 4-std type k, both drawn copper tubing. the system conveys ethylene glycol at a rate of 0.013 m3/s. the pressure drop across the system is to be calculated. there are two 90° elbows in the 6-in pipe, a reduction from the 6-in pipe to the 4-in pipe and four 90° elbows in the 4-in pipe. all fittings are soldered (same as flanged) and regular. the inlet and outlet of the system are at the same height.
Answers: 1
You know the right answer?
Consider laminar flow of a fluid with 3u 4 that undergoes a combined entrance process within a const...
Questions
question
Health, 28.01.2021 07:10
question
Spanish, 28.01.2021 07:10
Questions on the website: 13722367