Engineering, 08.11.2019 18:31 Lizzyloves8910

For the value of kp = 0.2 and given a unit step reference input, use gcl(s) to obtain the controlled output θ(s). next, using the poles of θ(s), provide the formulation of θ(t) as a function of time. do not compute the residues. (d) for each value of controller gain kp = 0.2, 0.5, 1.0, 2.0, obtain the response of the closed-loop output θ(t) given that the reference is a unit step input. you can use the step command for this purpose, or build the model in simulink. superimpose the responses to be able to compare the time scales. how does a change in kp influence the response? briefly explain.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false

Answers: 2

Answer

Engineering, 04.07.2019 19:10

With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.

Answers: 1

Answer

Engineering, 06.07.2019 04:10

Aheat pump using refrigerant-134a heats a house by using underground water at 8°c as the heat source. the house is losing heat at a rate of 60,000 kj/h. the refrigerant enters the compressor at 280 kpa and 0°c, and it leaves at 1 mpa and 60°c. the refrigerant exits the condenser at 30°c. determine: (a) the power input to the heat pump, (b) the rate of heat absorption from the water, and (c) the increase in electric power input if an electric resistance heater is used instead of a heat pump

Answers: 2

Answer

Engineering, 06.07.2019 06:20

Asemiconductor is a solid substance that has a conductivity between that of an insulator and that of most metals. (true , false )

Answers: 2

Answer

You know the right answer?

For the value of kp = 0.2 and given a unit step reference input, use gcl(s) to obtain the controlle...

Questions