subject
Engineering, 08.11.2019 06:31 minaale

26.3-2. comparison of differential and flash distillation. a mixture of 100 kg mol that contains 60 mol % n-pentane (a) and 40 mol % n-heptane (b) is vaporized at 101.32 kpa pressure under differential conditions until 40 kg mol are distilled. use equilibrium data from example 26.3-2. what is the average composition of the total vapor distilled and the composition of the remaining liquid? if this same vaporization is done in an equilibrium or flash distillation and 40 kg mol are distilled, what is the composition of the vapor distilled and of the remaining liquid?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
question
Engineering, 04.07.2019 18:20
Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false
Answers: 3
question
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
question
Engineering, 04.07.2019 18:20
For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.
Answers: 1
You know the right answer?
26.3-2. comparison of differential and flash distillation. a mixture of 100 kg mol that contains 60...
Questions
question
Biology, 22.02.2021 14:00
question
Social Studies, 22.02.2021 14:00
Questions on the website: 13722363