subject
Engineering, 08.11.2019 04:31 jeffylovesgreenbeans

Ahydraulic press is powered by a remote high-pressure pump. the gage pressure at the pump is 20 mpa, and the pressure required to operate the press is 19mpa (gage) at a flow rate of 0.032 m3/min. the press and pump are to be connected by 100 m of drawn stainless steel tubing. the fluid properties are as follows: µ=50 cp, sg = 0.90. what is the minimum tubing diameter that can be used? what commercial steel pipe nominal size is suitable for this purpose if schedule number is 80?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:10
Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer
Answers: 2
question
Engineering, 04.07.2019 19:10
Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?
Answers: 3
question
Engineering, 04.07.2019 19:20
The quality is zero at a)-the saturated vapour state b)-the saturated liquid state c)-the saturated liquid-vapour mixture state d)-none of the states in the other answers
Answers: 3
You know the right answer?
Ahydraulic press is powered by a remote high-pressure pump. the gage pressure at the pump is 20 mpa,...
Questions
question
Mathematics, 19.05.2020 16:02
question
Mathematics, 19.05.2020 16:03
Questions on the website: 13722359