Engineering, 08.11.2019 03:31 carcamophillip

Asteel plate 0.1 meters thick is initially at a uniform temperature of 200 °c. the steel plate is to be annealed in a gas furnace by heating the plate to a minimum temperature of 550 °c. the temperature of the combustion products is 800 °c and the convection coefficient is 250 w/m2k. both sides of the plate are exposed to the convection heat transfer. determine the time the steel plate should reside in the furnace. (plate: r = 7830 kg/m3; cp = 550 j/kgk; k = 48 w/m*k)

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false

Answers: 2

Answer

You know the right answer?

Asteel plate 0.1 meters thick is initially at a uniform temperature of 200 °c. the steel plate is to...

Questions