Engineering, 08.11.2019 02:31 camballard3848
Ti-6al-4v is used to make a cylindrical pressure vessel having closed ends with an inner diameter of 250 mm and wall thickness of 2.5 mm. what repeatedly applied pressure will cause fatigue failure in 105 cycles (neglect stress raisers effect of the end closure or other geometric discontinuities)? assume r = 0 loading and look up the material properties of ti-6al-4v from lecture 3.
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
Engineering, 04.07.2019 19:10
The short distance from the objective lens to the object causes problems at high magnification. which of the following is the most serious? a. cleaning the object surface b. positioning the object c. reflection from the object surface. d. illumination of the object
Answers: 1
Engineering, 04.07.2019 19:10
Asteel wire of 2 mm diameter is fixed between two points located 2 m apart. the tensile force in the wire is 250n, if its density of steel is given by 7830 kg/m3 the fundamental frequency of vibration hz? ?
Answers: 3
You know the right answer?
Ti-6al-4v is used to make a cylindrical pressure vessel having closed ends with an inner diameter of...
Questions
Geography, 12.04.2021 04:50
History, 12.04.2021 04:50
Mathematics, 12.04.2021 04:50
Social Studies, 12.04.2021 05:00
Mathematics, 12.04.2021 05:00
Computers and Technology, 12.04.2021 05:00
Mathematics, 12.04.2021 05:00
Health, 12.04.2021 05:00
