Engineering, 07.11.2019 23:31 jdkrisdaimcc11
Rectification of a heptane–ethyl benzene mixture. a saturated liquid feed of 200 mol/h at the boiling point containing 42 mol % heptane and 58% ethyl benzene is to be fractionated at 101.32 kpa abs to give a distillate containing 97 mol % heptane and a bottoms containing 1.1 mol % heptane. the reflux ratio used is 2.5: 1. calculate the mol/h distillate, mol/h bottoms, theoretical number of trays, and the feed tray number. equilibrium data are given below at 101.32 kpa abs pressure for the mole fraction n-heptane h and yh:
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
Engineering, 04.07.2019 18:20
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
Engineering, 04.07.2019 18:20
A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.
Answers: 3
Engineering, 04.07.2019 18:20
For each of the following process: a) sketch the p-v diagram, b)sketch t-s diagram, c) sketch t-v diagram, d) sketch the boundary work on one of the diagrams (a, b or c) and e) sketch the reversible heat transfer on one of the diagrams (a, b or c): 1- isobaric process from compressed liquid to superheated vapor 2- isothermal process from compressed liquid to superheated vapor 3- isentropic process from compressed liquid to superheated vapor
Answers: 3
You know the right answer?
Rectification of a heptane–ethyl benzene mixture. a saturated liquid feed of 200 mol/h at the boilin...
Questions
History, 15.04.2020 02:07
Physics, 15.04.2020 02:07
Geography, 15.04.2020 02:07
History, 15.04.2020 02:07
Chemistry, 15.04.2020 02:07
Mathematics, 15.04.2020 02:07
