Engineering, 07.11.2019 05:31 01222002
Consider a low-speed open-circuit subsonic wind tunnel. the tunnel is turned on, and the pressure difference between the inlet (the settling chamber) and the test section is read as a height difference of 10 cm on a u-tube mercury manometer. (the density of liquid mercury is 1.36 x 104 kg/m3.) assume that a pitot tube is inserted into the test-section flow of the wind tunnel. the tunnel test section is completely sealed from the outside ambient pressure. calculate the total pressure measured by the pitot tube, assuming the static pressure at the tunnel inlet is atmospheric. (round the final answer to two decimal places.) the total pressure measured by the pitot tube is * 105 n/m2
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 14:10
Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned
Answers: 2
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
You know the right answer?
Consider a low-speed open-circuit subsonic wind tunnel. the tunnel is turned on, and the pressure di...
Questions
Biology, 10.12.2019 17:31
Mathematics, 10.12.2019 17:31
Mathematics, 10.12.2019 17:31
