subject
Engineering, 07.11.2019 02:31 Hardydonotmess1

7. a tube bank housing 10mm diameter tubes, st = sl = 20mm, consists of 10 rows of tubes with 50 tubes in each row. cold water flows through the tubes, maintaining the outer surface temperature at 27°c, while hot flue gases at 427°c and a velocity of 5 m/s flow over the tubes. the properties of the flue gas may be approximated as those of atmospheric air at 427°c. what is the total rate of heat transfer per unit length of tubes in the bank? state your assumptions!

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
question
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
question
Engineering, 04.07.2019 18:10
Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation
Answers: 1
You know the right answer?
7. a tube bank housing 10mm diameter tubes, st = sl = 20mm, consists of 10 rows of tubes with 50 tub...
Questions
question
Business, 12.07.2019 21:00
Questions on the website: 13722367