Engineering, 06.11.2019 21:31 nickyacoub65

Consider a proposed offshore wind farm composed of 106 siemens direct drive wind turbines each with a rated capacity of 6.00 mw. each wind turbine has a rotor diameter of 154 meters, an effectiveness of 67.5%, and a generator efficiency of 96.0%. the array efficiency is 80.0%. it is estimated that the wind farm will generate 2500 gwh of electricity annually. each wind turbine requires 400 hours of maintenance annually. the density of air is 1.225 kg/m3.

a. what is the coefficient of performance for the turbine rotor (%)

b. what is the overall efficiency of the proposed wind farm (%)?

c. what is the capacity factor of the proposed wind farm (%)?

d. what is the swept area of the proposed wind turbines (m2)?

e. what is the rated wind speed for the proposed wind turbines (m/s)?

f. what is the availability of the proposed wind turbines (%)?

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:20

An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.

Answers: 3

Answer

Engineering, 04.07.2019 19:20

At steady state, air at 200 kpa, 325 k, and mass flow rate of 0.5 kg/s enters an insulated duct having differing inlet and exit cross-sectional areas. the inlet cross-sectional area is 6 cm2. at the duct exit, the pressure of the air is 100 kpa and the velocity is 250 m/s. neglecting potential energy effects and modeling air as an 1.008 kj/kg k, determine ideal gas with constant cp = (a) the velocity of the air at the inlet, in m/s. (b) the temperature of the air at the exit, in k. (c) the exit cross-sectional area, in cm2

Answers: 2

Answer

Engineering, 06.07.2019 02:30

Define thermoplastic polymers and thermosetting polymers in terms of their structures, and (ii) describe briefly a process suitable for the production of products from each type of polymer.

Answers: 3

Answer

Engineering, 06.07.2019 03:10

List and describe the parts of boxford cnc milling machine with pictures?

Answers: 2

Answer

You know the right answer?

Consider a proposed offshore wind farm composed of 106 siemens direct drive wind turbines each with...

Questions