Aconstant head hydraulic conductivity test was run on a quartz sand specimen (gs = 2.65). the sample was 110 mm long with a diameter of 50 mm. the temperature of the water used to conduct the test was 22°c. after 5 minutes, the discharge under a constant head of 25 cm was 79 cm3. the mass of the solids of the sample was determined to be 385 g. calculate:

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.