Engineering, 02.11.2019 07:31 sfmartori

Stainless steel (aisi 304) ball bearings, which have uniformlybeen heated to 850 c, are hardened by quenching them in an oil baththat is maintained at 40 c. the ball diameter is 20 mm, andthe convection coefficient associated with the oil bath is 1000w/m2*k.
(a) if quenching is to occur until the surface temperature ofthe balls reaches 100 c, how long must the balls be kept in theoil? what is the center temperature at the conclusion of thecooling period?
(b) if 10,000 balls are to be quenched per hour, what isthe rate at which energy must be removed by the oil bath coolingsystem in order to maintain its temperature at 40 c?

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Have a greater impact on maintenance productivity than any other support group. (clo5) a)-the top management b)-inventory and purchasing c)-sub-contracting d)-cmms

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]

Answers: 1

Answer

Engineering, 04.07.2019 19:10

10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.

Answers: 2

Answer

You know the right answer?

Stainless steel (aisi 304) ball bearings, which have uniformlybeen heated to 850 c, are hardened by...

Questions