Engineering, 02.11.2019 06:31 Wavy10691
11. a planned extrusion operation involves steel at 800°c, with an initial diameter of 100 mm and a final diameter of 20 mm. two presses, one with a capacity of 20 mn and the other of 10 mn, are available for this operation. obviously, the larger press requires greater care and more expensive tooling. is the smaller press sufficient for the operation? if not, what recommendations would you make to allow use of the smaller press?
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.
Answers: 1
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Engineering, 04.07.2019 18:10
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
You know the right answer?
11. a planned extrusion operation involves steel at 800°c, with an initial diameter of 100 mm and a...
Questions
History, 30.07.2019 10:00
Computers and Technology, 30.07.2019 10:00
English, 30.07.2019 10:00
Arts, 30.07.2019 10:00
History, 30.07.2019 10:00
Mathematics, 30.07.2019 10:00
History, 30.07.2019 10:00
Advanced Placement (AP), 30.07.2019 10:00
History, 30.07.2019 10:00
Physics, 30.07.2019 10:00
