Engineering, 02.11.2019 03:31 chandranewlon
Hot engine oil at 150°c is flowing in parallel over a flat plate at a velocity of 2 m/s. surface temperature of the 0.5-m-long flat plate is constant at 50°c. determine (a) the local convection heat transfer coefficient at 0.2 m from the leading edge and the average convection heat transfer coefficient, and (b) repeat part (a) using the churchill and ozoe (1973) relation.
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.
Answers: 2
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above
Answers: 1
You know the right answer?
Hot engine oil at 150°c is flowing in parallel over a flat plate at a velocity of 2 m/s. surface tem...
Questions
Biology, 28.05.2021 02:20
Social Studies, 28.05.2021 02:20
Mathematics, 28.05.2021 02:20
Mathematics, 28.05.2021 02:20
Mathematics, 28.05.2021 02:20
Mathematics, 28.05.2021 02:20
Mathematics, 28.05.2021 02:20
