Engineering, 30.10.2019 22:31 shy88

For this assignment, you will create a weighted scoring model to determine grades for a course based on the following information: final grades are based on - three exams worth 20%, 15%, and 25%, respectively homework is worth 15% a group project is worth 25% enter scores for three students - assume student 1 earns 100% (or 100) on every item. assume student 2 earns 70% on each of the exams, 80% on the homework, and 95% on the group project. assume student 3 earns 90% on exam 1, 80% on exam 2, 75% on exam 3, 80% on the homework, and 70% on the group project. you can use the weighted scoring model template wtd_decision_matrix. xlsx provided on the companion website for this text, create your own spreadsheet, or make the matrix by hand.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 04.07.2019 19:10

An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed

Answers: 3

Answer

Engineering, 04.07.2019 19:20

Determine the stoichiometric and actual air-fuel ratios and the mole flue gas composition for combustion with 15% excess air for raw indiana, pennsylvania raw coal.

Answers: 3

Answer

Engineering, 05.07.2019 04:30

Technician a says that in a worm gear steering system, most excessive steering free play is usually found in the gearbox. technician b says that in a rack-and-pinion steering system, excessive free play can be found in the bushings. who is correct?

Answers: 2

Answer

You know the right answer?

For this assignment, you will create a weighted scoring model to determine grades for a course based...

Questions