subject
Engineering, 30.10.2019 04:31 barnettboy76

The air velocity in the duct of a heating system is to be measured by a pitot-static probe inserted into the duct parallel to the flow. the differential height between the water columns connected to the two outlets of the probe is 0.022 m. take the density of water to be 1000 kg/m3. the gas constant of air is r = 0.287 kpa-m3/kg-k. the air temperature and pressure in the duct are 45ºc and 98 kpa, respectively.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
question
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
question
Engineering, 04.07.2019 19:10
The air in an automobile tire with a volume of 0.015 m3 is at 32°c and 140 kpa gage. determine the amount of air that must be added to raise the pressure to the recommended value of 206 kpa gage. assume the atmospheric pressure to be 128 kpa and the temperature and the volume to remain constant.[r-0.287 kj/kgk]
Answers: 3
question
Engineering, 04.07.2019 19:10
Arigid tank contains 10 kg of air at 137 kpa (abs) and 21°c. more air is added to the tank until the pressure and temperature rise to 242 kpa (abs) and 32°c, respectively. determine the amount of air added to the tank. [r-0.287 kj/kg k]
Answers: 3
You know the right answer?
The air velocity in the duct of a heating system is to be measured by a pitot-static probe inserted...
Questions
question
Social Studies, 28.10.2019 14:31
question
Health, 28.10.2019 14:31
Questions on the website: 13722363