Engineering, 26.10.2019 00:43 sawyerfauver

In the abc machine shop, workers punch in at 8: 00 am and punch out at 4: 30 pm. the labor-management agreement allows 30 min for lunch, which is not counted as part of the 8-hour shift. in determining the allowance for computing time standards, two 15 min breaks are provided (personal time and fatigue), one in the morning and one in the afternoon; and 20 min have been negotiated as lost time due to supervisor interruptions and equipment malfunctions. what pfd allowance factor should be added to the normalized time to account for these losses in the computation of a standard time, so that if the worker works at standard performance, she will produce exactly eight standard hours?

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater

Answers: 3

Answer

Engineering, 04.07.2019 18:10

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.

Answers: 1

Answer

You know the right answer?

In the abc machine shop, workers punch in at 8: 00 am and punch out at 4: 30 pm. the labor-managemen...

Questions