Your job is to write a program that measures the efficiency of stove-top burners. before using your program, the consumer will place a pan of room-temperature water on the stove (with + gallon of water), record the initial room temperature in units of degrees fahrenheit, turn on the burner, and wait for it to boil. when the water begins to boil, the consumer will record the time in units of minutes it takes for the water to boil. finally, the consumer will look up the power for the burner provided by the manufacturer.

A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?