Air enters the compressor of a regenerative air-standard brayton cycle with a volumetric flow rate of 60 m3/s at 0.8 bar, 280 k. the compressor pressure ratio is 20, and the maximum cycle temperature is 2100 k. for the compressor, the isentropic efficiency is 92% and for the turbine the isentropic efficiency is 95%. for a regenerator effectiveness of 85%, determine

(a) the net power developed, in mw.
(b) the rate of heat addition in the combustor, in mw.
(c) the thermal efficiency of the cycle.

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.

Apreheater involves the use of condensing steam at 100°c on the inside of a bank of tubes to heat air that enters at 1 atm and 25°c. the air moves at 5 m/s in cross flow over the tubes. each tube is 1 m long and has an outside diameter of 10 mm. what is the minimum value of nl needed to achieve an outlet temperature of t 75 c? what is the corresponding pressure drop across the tube bank?