subject
Engineering, 25.10.2019 22:43 tbair5417

Consider a hot dog to have the following dimensions and properties: diameter = 20 mm, cp = 3.35 kj/kg⋅k, rho = − 880 kg/m3, and k = 0.5 w/m⋅k. for the hot dog initially at 5 c, exposed to boiling water at 100 c, with a surface coefficient of 90 w/m2⋅k, what will be the cooking time if the required condition is for the center temperature to reach 80 c?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
question
Engineering, 04.07.2019 18:20
Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false
Answers: 2
question
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
question
Engineering, 04.07.2019 18:20
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
You know the right answer?
Consider a hot dog to have the following dimensions and properties: diameter = 20 mm, cp = 3.35 kj/...
Questions
question
Social Studies, 20.11.2019 22:31
Questions on the website: 13722367