Engineering, 25.10.2019 22:43 sarahbennett11p4yxlb

Adisplacement transducer has the following specifications: linearity error: ±0.25% readingdrift: ±0.05% /℃ readingsensitivity error: ±0.25% readingexcitation : 10-25 vdc output: 0-5 vdcrange: 0-5 cmthe transducer output is to be indicated on a voltmeter having a stated accuracy of ± 0.1% reading with a resolution of 10 μv. the system is to be used at room temperature, which can vary by ±10○c. estimate an uncertainty in a nominal displacement of 2 cm at the design stage. assume 95% confidence. assume sensitivity is k = 1 v/cm.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges

Answers: 1

Answer

You know the right answer?

Adisplacement transducer has the following specifications: linearity error: ±0.25% readingdrift: ±...

Questions