Engineering, 25.10.2019 03:43 eva4548

A3-mm-diameter electrical wire is insulated by a 2-mm-thick rubberized sheath (k = 0.13 w/m ⋅ k), and the wire/sheath interface is characterized by a thermal contact resistance of rt ,c 3 10 m k/w ′′ = × −4 2 ⋅ . the convection heat transfer coefficient at the outer surface of the sheath is 15 w/m2 ⋅ k, and the temperature of the ambient air is 20°c. if the temperature of the insulation may not exceed 50°c, what is the maximum allowable electrical power that may be dissipated per unit length of the conductor? what is the critical radius of the insulation?

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?

Answers: 1

Answer

Engineering, 04.07.2019 19:10

What is a monomer? how do they form a ploymer from the view point of chemical bonding?

Answers: 1

Answer

You know the right answer?

A3-mm-diameter electrical wire is insulated by a 2-mm-thick rubberized sheath (k = 0.13 w/m ⋅ k), an...

Questions