Engineering, 23.10.2019 23:00 carolelai08

The second-order liquid phase reaction c_6h_5coch_2br + c_6h_5n rightarrow c_6h_5coch_2nc_5h_5br is carried out in a batch reactor at 35 degree c. the specific reaction rate constant is 0.0445 dm^3/mol/min. the reactor 1 is changed with 1,000 dm^3, where the concentration of each reactant after mixing is 2m. (a) what is the conversion after 10, 50, and 100 minutes? now, consider the case when after filling reactor 1, the drain at the bottom of reactor 1 is left open and it drains into reactor 2, mounted below it, at volumetric rate of 10 dm^3/min. (b) what will be the conversion and concentration of each species in the reactor 1 after 10, 50, and 80 minutes in the reactor that is being drained? (c) what is the conversion and concentration of each species in the reactor 2 that is filling up with the liquid from reactor 1 after 10, and after 50 minutes? (d) at the end of 50 minutes the contents of the two reactors are added together. what is the overall conversion after mixing?

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa

Answers: 1

Answer

Engineering, 04.07.2019 19:10

Air inially occupying a volume of 1 m2 at 100 kpa, 27 c undergoes three internally reversible processes in series. process 1-2 compression to 500 kpa during which pv constant process 2-3 adiabatic expanslon to 100 kpa process 3-1: constant-pressure expansion to 100 kpa (a) calculate the change of entropy for each of the three processes. (b) calculate the heat and work involved in each process. (c) is this cycle a power cycle or refrigeration cycle?

Answers: 3

Answer

Engineering, 04.07.2019 19:10

When subject to a steady load (within elastic range) over a long period of time, what is the major difference in material behavoir between steel and plastic?

Answers: 2

Answer

You know the right answer?

The second-order liquid phase reaction c_6h_5coch_2br + c_6h_5n rightarrow c_6h_5coch_2nc_5h_5br is...

Questions