subject
Engineering, 23.10.2019 23:00 orlando19882000

The airbus a380 has a cruise mach number m = 0.85 with a lift to drag ratio l/d = 20. for simplicity, assume it cruises at a constant altitude of 35, 000 feet with a constant total weight of 450 metric tons (of course, in practice both of them change. the plane is going to get lighter because of fuel burn and will be scheduled to fly at a higher altitude before descending to the destination airport). it uses 4 turbo-fan engines.

(a) what is the thrust needed from each of the 4 engines at the cruise?

(b) as a very rough estimate, assume the average exhaust velocity of the jet from the engine is 400 m/s. estimate the total mass flow rate of the propellant (air breathed-in by the engines plus a small amount fuel).

(c) calculate the flight time from la to beijing. if the overall efficiency of the engines is 35%, estimate the total fuel that the plane has to carry onboard.

(d) now assume we use rockets with the same jet velocity, calculate the total rocket propellant (fuel and oxidizer) one would have to carry with the airplane if we were to use rocket engines with the same jet velocity. (note the thrust equation for rockets is different from that for the air-breathing engine). compare the propulsion efficiencies of the two options.

(e) we can reduce the amount of needed propellant for the rocket option by increasing the rocket exhaust velocity to 2000 m/s/. redo the calculations for the total amount of propellant needed and the resultant propulsion efficiency.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
question
Engineering, 04.07.2019 12:10
On a average work day more than work place firs are reorted
Answers: 1
question
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
question
Engineering, 04.07.2019 18:10
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
You know the right answer?
The airbus a380 has a cruise mach number m = 0.85 with a lift to drag ratio l/d = 20. for simplicity...
Questions
question
Biology, 02.07.2019 07:10
question
Mathematics, 02.07.2019 07:10
question
Mathematics, 02.07.2019 07:10
Questions on the website: 13722363