subject
Engineering, 19.10.2019 02:30 mandy9386

In our discussion of tcp congestion control in section 3.7, we implicitly assumed that the tcp sender always had data to send. consider now the case that the tcp sender sends a large amount of data and then goes idle (since it has no more data to send) at t1. tcp remains idle for a relatively long period of time and then wants to send more data at t2. what are the advantages and disadvantages of having tcp use the cwnd and ssthresh values from t1 when starting to send data at t2? what alternative would you recommend? why?

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false
Answers: 2
question
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
question
Engineering, 04.07.2019 18:10
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
question
Engineering, 04.07.2019 18:20
An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.
Answers: 3
You know the right answer?
In our discussion of tcp congestion control in section 3.7, we implicitly assumed that the tcp sende...
Questions
question
English, 01.12.2020 16:10
question
SAT, 01.12.2020 16:10
question
Social Studies, 01.12.2020 16:10
Questions on the website: 13722361