Engineering, 19.10.2019 00:30 Fangflora3

An insurance company has hired you as a consultant to improve their understanding of burn injuries. they are especially interested in injuries induced when a portion of a worker? s body comes into contact with machinery that is at elevated temperatures in the range of 50 to 100 degree c. their medical consultant informs them that irreversible thermal injury (cell death) will occur in any living tissue that is maintained at t > or = to 48 degree c for a duration of delta t > or = to 10 s. they want information concerning the extent of irreversible tissue damage (as measured by distance from the skin surface) as a function of the machinery temperature and the time during which contact is made between the skin and the machinery. assume that living tissue has a normal temperature of 37 degree c is isotropic and has constant properties equivalent to those of liquid water. to assess the seriousness of the problem, compute locations in the tissue at which the temperature will reach 48 degree c after 10 s of exposure to machinery at 50 degree c and 100 degree c.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater

Answers: 3

Answer

Engineering, 04.07.2019 18:10

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.

Answers: 1

Answer

You know the right answer?

An insurance company has hired you as a consultant to improve their understanding of burn injuries....

Questions