subject
Engineering, 18.10.2019 20:30 coolestkid2401

Two streams flow into a 500 us gallon tank. the first stream is 10.0 wt% ethanol and 90.0 wt% hexane and has a density of rho1 = 0.68 g/cm3 . the second stream is 90.0 wt% ethanol and 10.0 wt% hexane and has a density of rho2 = 0.78 g/cm3 . after the tank is filled, which takes 22 min, the mixture is 60.0 wt% ethanol and 40.0 wt% hexane. a) draw and label the diagram for this system. b) estimate the density of the mixed stream. use this density to calculate the final mass of the mixture in the filled tank. c) calculate the mass (in kg/min) and volumetric (in l/min) flow rates of the two streams, assuming that they fill the tank at a constant rate

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79
Answers: 1
question
Engineering, 04.07.2019 18:10
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
question
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
question
Engineering, 04.07.2019 18:10
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
You know the right answer?
Two streams flow into a 500 us gallon tank. the first stream is 10.0 wt% ethanol and 90.0 wt% hexane...
Questions
question
Social Studies, 04.08.2019 09:00
Questions on the website: 13722367