Faults are fractures in earth's crust where rocks on either side of the crack have slid past each other.
sometimes the cracks are small with barely noticeable movement between the rock layers. other faults can also be hundreds of miles long, such as the san andreas fault in california. we classify faults by how the two rocky blocks on either side of a fault move relative to each other. when movement along a fault is the reverse of what you would expect with normal gravity, the fault is called a reverse fault. the hanging wall moves up in relation to the foot wall.

A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?