Engineering, 16.10.2019 16:20 bethdove9466

Four horizontal, homogeneous, isotropic geologic formations, each 5 m thick, overlie one another. if the hydraulic conductivities are 10-4 , 10-6 , 10-4 , and 10-6 m/s, respectively, calculate the horizontal and vertical components of hydraulic conductivity for the equivalent homogeneous-but-anisotropic formation. b. repeat for hydraulic conductivities of 10-4 , 10-8 , 10-4 , and 10-8 m/s, c. repeat for hydraulic conductivities of 10-4 , 10-10, 10-4 , and 10-10 m/s.

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Ahe-xe mixture containing a 0.75 mole fraction of helium is used for cooling electronics in an avionics application. at a temperature of 300 k and atmospheric pressure, calculate the mass fraction of helium and the mass density, molar concentration and molecular weight of the mixture. if the cooling capacity is 10 l, what is the mass of the coolant?

Answers: 3

Answer

Engineering, 04.07.2019 19:10

Estimate the change in specific internal energy au and specific enthalpy h from inlet to outlet for ethylene glycol (a liquid) flowing through each of the following devices: (a) a heat exchanger where the glycol temperature increases from 20 °c to 80 °c; (b) a pump operating at about 25 °c and increasing the glycol pressure from 100 kpa to 8 mpa.

Answers: 2

Answer

You know the right answer?

Four horizontal, homogeneous, isotropic geologic formations, each 5 m thick, overlie one another. if...

Questions