Engineering, 15.10.2019 19:00 brendacauani12345

Water is leaking out of an inverted conical tank at a rate of 1.5 cm3 /min at the same time that water is being pumped into the tank at a constant rate. the tank has height 10 cm and the diameter at the top is 6 cm. if the water level is rising at a rate of 1.0 cm/min when the height of the water is 2 cm, find the rate at which water is being pumped into the tank. (a) draw a picture of the situation for any time t. (b) what quantities are given in the problem? what is the unknown quantity you are looking for? (c) write an equation that relates the quantities. (d) finish solving the problem.

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.

Answers: 2

Answer

You know the right answer?

Water is leaking out of an inverted conical tank at a rate of 1.5 cm3 /min at the same time that wat...

Questions