Consider a bone-like sample cut into a long rectangular prism that has a healing fracture that forms an angle of 60o with the shaft. when the sample is loaded in compression equivalent to half of the person’s weight, what is the stress in the sample normal to a transverse cross-section of the shaft and normal to the healing fracture? for simplicity, assume external loading forces are only in-line with the solid shaft. body mass = 60 kg, g=10 m/s2 , cross-sectional area of shaft a=4 cm2

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables

Ashielded metal arc-welding operation is accomplished in a work cell by a fitter and a welder. the fitter takes 5.5 min to load components into the welding fixture at the beginning of the work cycle, and 1.5 min to unload the completed weldment at the end of the cycle. the total ength of the weld seams 1200 mm, and the travel speed used by the welder averages 300 mm/min. every 600 mm of seam length, the welding stick must be changed, which takes 0.8 min. while the fitter is working, the welder is idle (resting): and while the welder is working the fitter is idle. (a) determine the average arc-on time as a fraction of the work cycle time. (b) how much improvement in arc-on time would result if the welder used flux-cored arc welding (manually operated), given that the spool of weld wire must be changed every 10 weldments, and it takes the welder 5.0 min to accomplish the change? (c) what are the production rates for these two cases (weldments completed per hour)? attach your work and solutions.