Engineering, 07.10.2019 22:20 chrismeldajbaptiste

Need asap
1. name the view that shows the width (height) of the coupling.

2. name the view in which the holes are shown as circles.

3. name the kind of line shown at e, f, g, h, i, and j.

4. what circle represents the 4.500 diameter flange?

5. what circle represents the 1. diameter?

6. name the kind of line shown at n.

7. how many holes are to be drilled in the larger flange?

8. indicate the drill size to be used.

9. give the diameter circle on which the equally spaced holes are drilled in the larger flange

10. how many holes are to be drilled in the smaller flange?

11. how deep is the 1.250 diameter hole?

12. give the diameter of the reamed holes.

13. state the angle with the horizontal center line used for locating reamed hole o.

14. what is the overall width (height) of the coupling?

15. what is the diameter of the smaller flange?

16. what is the diameter of the circle a and b?

17. what is the depth of the 1.000" hole?

18. what is the thickness of the larger flange?

19. if 5/16" bolts are used in the 7 drilled holes, what will be the clearance between the hole and the bolt?

20. determine distances c and d.

Need asap1. name the view that shows the width (height) of the coupling.2.

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

Answer

Engineering, 03.07.2019 15:10

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Answers: 3

Answer

Engineering, 04.07.2019 12:10

On a average work day more than work place firs are reorted

Answers: 1

Answer

Engineering, 04.07.2019 18:10

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Answers: 1

Answer

You know the right answer?

Need asap
1. name the view that shows the width (height) of the coupling.

2. name t...