Engineering, 07.10.2019 19:30 maddiemalmstrom

2) steel rod (1) is fastened to brass rod (2) with a pin at b. the diameter of the pin is 7 /8 in. both rods are fixed at their ends a and c. the cross-sectional area of the steel rod is 1 in2 and the brass rod 1.5 in2 . the coefficient of thermal expansion for the steel is 6.5 x 10-6 /°f and its elastic modulus is 29 x 103 ksi. the coefficient of thermal expansion for the brass is 11.3 x 10-6 /°f and its elastic modulus is 15 x 103 ksi. a) the temperature drops 40°f. write the equilibrium and compatibility equation(s) needed to solve the problem along with supporting sketches. b) calculate the internal force in members (1) and (2) in kips. indicate tension or compression. [ans. to check: f1 = 9.2 k] c) calculate the average normal stress in each member in ksi. indicate tension or compression. d) compute the shear stress in the pin at b in ksi. [ans. to check: τ = 15.3 ksi] e) calculate the movement at b in inches. clearly indicate direction.

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Answers: 3

Answer

Engineering, 03.07.2019 14:10

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery

Answers: 2

Answer

You know the right answer?

2) steel rod (1) is fastened to brass rod (2) with a pin at b. the diameter of the pin is 7 /8 in. b...

Questions