subject
Engineering, 06.10.2019 09:02 ariana0517

A3-mm-diameter electrical wire is insulated by a 2-mm-thick rubberized sheath (k = 0.13 w/m ⋅ k), and the wire/sheath interface is characterized by a thermal contact resistance of rt ,c 3 10 m k/w ′′ = × −4 2 ⋅ . the convection heat transfer coefficient at the outer surface of the sheath is 15 w/m2 ⋅ k, and the temperature of the ambient air is 20°c. if the temperature of the insulation may not exceed 50°c, what is the maximum allowable electrical power that may be dissipated per unit length of the conductor? what is the critical radius of the insulation?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
question
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
question
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
question
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
You know the right answer?
A3-mm-diameter electrical wire is insulated by a 2-mm-thick rubberized sheath (k = 0.13 w/m ⋅ k), an...
Questions
question
Mathematics, 26.06.2019 08:50
Questions on the website: 13722367