subject
Engineering, 05.10.2019 12:00 clairajogriggsk

Gas is sampled at 1 bar pressure from the exhaust manifold of an internal combustion engine and analyzed. the mole fractions of species in the exhaust are: h2o=0.0468; co2=0.0585; o2=0.123; n2=0.712 (d) the engine has a displaced volume of 2 liters. estimate approximately the percentage by which the fuel flow rate would be increased if this engine were operated at its maximum load at this same speed (2000 rev/min). explain briefly what limits the equivalence ratio at maximum load. hint use equivalent fuel to air ratio of 0.7 at engine maximum load.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
question
Engineering, 04.07.2019 18:20
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
question
Engineering, 04.07.2019 18:20
Wiy doeres rere okhn a pump whon working betwon the same pressure range?
Answers: 2
question
Engineering, 04.07.2019 19:10
For a process taking place in a closed system containing gas, the volume and pressure relationship is pvi-constant. -1.5 bar, the process starts with initial conditions, pi = =0.03 m3 and ends with final volume, v2-0.05 m3 determine the work done by the gas.
Answers: 2
You know the right answer?
Gas is sampled at 1 bar pressure from the exhaust manifold of an internal combustion engine and anal...
Questions
question
Mathematics, 08.03.2021 18:10
Questions on the website: 13722362