Engineering, 05.10.2019 12:00 shantejahtierr63961
A30-mm-diameter shaft transmits 700 kw at 1500 rpm. bending and axial loads are negligible. (a) what is the nominal shear stress at the surface? (b) if a hollow shaft of inside diameter 0.8 times outside diameter is used, what outside diameter would be required to give the same outer surface stress? (c) how do weights of the solid and hollow shafts compare?
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
Engineering, 04.07.2019 18:10
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
You know the right answer?
A30-mm-diameter shaft transmits 700 kw at 1500 rpm. bending and axial loads are negligible. (a) what...
Questions
English, 15.12.2019 19:31
Mathematics, 15.12.2019 19:31
Mathematics, 15.12.2019 19:31
Mathematics, 15.12.2019 19:31
Social Studies, 15.12.2019 19:31
Social Studies, 15.12.2019 19:31
Mathematics, 15.12.2019 19:31
History, 15.12.2019 19:31
