Engineering, 01.10.2019 18:30 coolgirl10020031

Nitrogen is stored in a tank at a pressure of 20 bar and 300 k. the tank has a capacity of 2.0 m3. gas is allowed to escape through a partially opened valve until the pressure reaches 2 bar. treat nitrogen gas as an ideal gas with a constant heat capacity of cp = 29.3 j/(mol k). consider two di erent assumptions about the relative rates of mass and heat exchange: (a) adiabatic: the process occurs suciently rapidly that there is negligible heat ow between the gas in the tank and its surroundings. (b) isothermal: gas leaks out of the tank so slowly that the temperature in the tank remains at 300 throughout the process, due to heat exchange with the surroundings.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?

Answers: 2

Answer

You know the right answer?

Nitrogen is stored in a tank at a pressure of 20 bar and 300 k. the tank has a capacity of 2.0 m3. g...

Questions