Engineering, 01.10.2019 01:00 live4dramaoy0yf9

The assembly consists of a brass shell (1) fully bonded to a ceramic core (2). the brass shell [e = 85 gpa, α= 20.8 × 10−6/°c] has an outside diameter of 64 mm and an inside diameter of 39 mm. the ceramic core [e = 290 gpa, α= 3.5 × 10−6/°c] has a diameter of 39 mm. at a temperature of 15°c, the assembly is unstressed. assume l = 320 mm. determine the largest temperature increase δ⁢t that is acceptable for the assembly if the normal stress in the longitudinal direction of the brass shell must not exceed 82 mpa.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 16:10

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.

Answers: 2

Answer

You know the right answer?

The assembly consists of a brass shell (1) fully bonded to a ceramic core (2). the brass shell [e =...

Questions