subject
Engineering, 29.09.2019 01:30 jocelynmarquillo1

During isobaric process wet water steam at temperature t = 223.94°c and pressure p = 25 bar changed its density from 14.5 kg/m' to 400 kg/m3. in the initial state wet steam occupied 0.1m^3. find initial and final quality of steam, work done by steam, amount of heat exchanged with the surroundings and entropy generated in the process if heat was transferred to the surroundings at 300 k. draw the process at the enthalpy-entropy diagram. from tables for p = 25 bar: specific volume of boiling water 0.0011974 m^3/kg, specific volume of saturated vapour 0.08 m^3/kg, heat of vaporization: 1838.98 kj/kg, specific heat of water: 4.19 kj/(kgk).

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
question
Engineering, 04.07.2019 19:10
The sum of the normal stresses does not change as the stress state rotates through an angle. a)-trune b)- false
Answers: 2
question
Engineering, 04.07.2019 19:20
A21-tooth spur pinion mates with a 28-tooth gear. the diametral pitch is 3 teeth/in and the pressure angle is 20°, find the following values: the addendum, dedendum, circular pitch, tooth thickness, and base circle diameters.
Answers: 2
question
Engineering, 06.07.2019 05:10
An ideal vapor-compression refrigeration cycle is employed to maintain a building temperature of 23°c when the outside temperature is 37°c. the cycle operates at steady state using ammonia as the working fluid. the mass flow rate of the refrigerant is 15 kg/min. the refrigerant enters the compressor at 1.5 bar and 10 °c. the condenser pressure is 20 bar and the temperature at the condenser exit is 45 °c. determine (a) the compressor power in kw. (b) the refrigeration capacity in tons. (c) the coefficient of performance. d) the maximum theoretical coefficient of performance.
Answers: 2
You know the right answer?
During isobaric process wet water steam at temperature t = 223.94°c and pressure p = 25 bar changed...
Questions
question
English, 15.04.2021 23:50
question
Mathematics, 15.04.2021 23:50
Questions on the website: 13722360