Engineering, 28.09.2019 00:20 xojade
Consider a tensile specimen made from a material that obeys the power harden- ing law with k = 400 mpa and n= 0.20. assume k is not sensitive to strain rate. one part of the gauge section has an initial cross-sectional area that is 0.99 times that of the rest of the gauge section. what will be the true strain in the larger area after the smaller area necks and reduces to 50% of its original area?
Answers: 1
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Engineering, 04.07.2019 18:20
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
Engineering, 04.07.2019 18:20
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
Engineering, 04.07.2019 18:20
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
Consider a tensile specimen made from a material that obeys the power harden- ing law with k = 400 m...
Health, 29.01.2020 03:40
Mathematics, 29.01.2020 03:40
Mathematics, 29.01.2020 03:40
Mathematics, 29.01.2020 03:40
Mathematics, 29.01.2020 03:40
Mathematics, 29.01.2020 03:40
Mathematics, 29.01.2020 03:40
English, 29.01.2020 03:40