An engine shaft running at 120 rp. m. is required to drive a machine shaft by means of a belt. the pulley on the engine shaft is of 2 m diameter and that of the machine shaft is 1 m diameter. if the belt thickness is 5 mm; determine the speed of the machine shaft, when 1. there is no slip; and 2. there is a slip of 3%

Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.

List and describe the attached tools in boxford cnc milling machine? and how many tools were used in your projects explain them?

Draw each component in sequence for a steam (rankine cycle) power plant. draw the system boundary needed to analyze this cycle as a closed system. note: this should just be one figure below! else