4. a researcher is testing a polymer with a known poisson’s ratio of 0.375 as a vascular graft. a 10 cm tube of the polymer with an outer diameter of 0.5 cm and a thickness of 0.2 cm is subject to conditions similar to blood flow and the length of the graft decreases by 10%. a. what is the inner diameter dimension when the graft is compressed? b. is this polymer an isotropic or anisotropic material?

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.