Engineering, 18.09.2019 02:30 athenawalcroff

Aheat pump with r-134a as the working fluid is used to keep a space at 25°c by absorbing heat from solar-heated water that enters the evaporator at 50°c at a rate of 0.065 kg/s, and leaves at 40°c. refrigerant enters the evaporator at 20°c with a quality of 15% and leaves at the same pressure as saturated vapor. if the compressor consumes 1.2 kw of power, determine (a) (0.5 point) the mass flow rate of the refrigerant, (b) (0.5 point) the rate of heat supply, (c) (0.5 point) the cop, and (d) (0.5 point) the minimum power input to the compressor for the same rate of heat supply.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:20

Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.

Answers: 3

Answer

Engineering, 06.07.2019 02:30

Define thermoplastic polymers and thermosetting polymers in terms of their structures, and (ii) describe briefly a process suitable for the production of products from each type of polymer.

Answers: 3

Answer

Engineering, 06.07.2019 03:10

Consider two concentric spheres forming an enclosure with diameters of 12 cm and 18 cm the spheres are maintained at uniform temperatures ti-50°c and t2 = 250°c and have emissivities .45 and .8, respectively. determine the net rate of radiation heat transfer between the two spheres per unit surface area.

Answers: 1

Answer

Engineering, 06.07.2019 03:30

The catalogue for a refrigerant 22, four-cylinder, hermetic compressor operating at 29 r/s. a condensing temperature of 40°c and an evaporating temperature of -4°c shows a refrigeration capacity of 115 kw. at this operating point, the motor (its efficiency is 90 percent) draws 34.5 kw. the bore of the cylinders is 87 mm and the piston stroke is 70 mm. the performance data are based on 8°c of sub-cooling of the liquid leaving the condenser. compute (a) the actual volumetric efficiency and (b) the compression efficiency.

Answers: 2

Answer

You know the right answer?

Aheat pump with r-134a as the working fluid is used to keep a space at 25°c by absorbing heat from s...

Questions