Which of these is least likely a step in replacing a failed compressor?
a. flushing the system
b. disconnecting and sealing the hoses
c. replacing the condenser
d. inspecting the muffler

C. Replacing the condenser is least likely a step in replacing a failed compressor.

Explanation:

To answer the above question, we need to understand the work of Air-cooling systems. There are 2 main units, compressor and condenser. Compresser and condenser are connected by the airtight pipe, and the required gas is injected in the system.

Compressor compresses the gas, compresed gas moves to condenser, condenser cools the gas, and the gas is expanded again, and then heat transfer takes place in indoor unit. Again the compressor compresses the gas, and process goes on.

So here, compressor is failed, so we need to inspect the muffler first of all to detect the issue, and definitely we need to remove all the gas from the system which means flushing the system, also hoses and other valves needs to be disconnected. However, replacing the condenser doesn't seems to be required to replace the failed compressor, as both are totally different units.

answer:

i am not 100% sure but i think it is a.)

dont take my word for it

explanation:

One of the benefits of working with chlorinated polyvinyl chloride (CPVC) pipe is that it can be cut with a variety of different tools that don’t require any electricity or heat. However, different cutting methods are preferred over others, depending on the application.

When cutting CPVC pipe, it is important to make a square, flat cut. An uneven cut limits the bonding area and weakens the fitting.

To help you make the best possible cut, we’ve put together the following dos and don’ts when cutting CPVC pipe in different situations.