subject
Engineering, 14.09.2019 02:30 grace7484

Water enters a counter flow, double-pipe heat exchanger at 45 c, flowing at the rate of 0.5 kg/s. it is heated by oil (cp = 1.884 kj/kg. k) flowing at the rate of 1 kg/s from an inlet temperature of 105 c. for an area of 18.0 m2 and an overall heat transfer coefficient of 340w/m^2.k, determine the total heat transfer rate.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:10
True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure
Answers: 2
question
Engineering, 04.07.2019 18:10
An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0
Answers: 3
You know the right answer?
Water enters a counter flow, double-pipe heat exchanger at 45 c, flowing at the rate of 0.5 kg/s. it...
Questions
question
Mathematics, 22.09.2020 03:01
Questions on the website: 13722361